Sony Ericsson PC Suite, Internet Connection
Trip Start
Unknown
1
8
52
Trip End
Ongoing
Phnom Penh,
Cambodia
Monday, June 9, 2008
Sony Ericsson PC Suite, Internet Connection The following instruction will guide you to connect PC to the internet using mobile phone, Sony Ericsson, as a modem.
Connect phone to PC
This window will be displayed after Sony Ericsson PC Suite is successfully installed in your PC. Please click on How to Connect button in the folloing window and follow the connection wizard until phone and PC is connected.
Phone and PC is connected
The following window will be displayed after phone and PC is connected in phone mode. The next phase is an Internet Connection Setting. Start Internet Connection by clicking on Tools button.
Internet Connection
Click on Internet Connection
Create a new connection
Internet Connection window is displayed. Expand the dropdown list below the Connect button or Click on the Connect button to configure internet connection.
Create a new connection
Select Create a new connection
Welcome to the Internet Connection Wizard
In this window click on Next button
Connection ID
Fill in Name the connection textbox: qbMore, Select Country/region: Cambodia, Select Service provider:Other
Connection type
In Connection type window, select UMTS > Click on Next button
Internet Connection Wizard 1
In this window, leave the User name and password blank. Fill in APN the word 'wap' > click on Next button
Internet Connection Wizard 2
In this window, select one of the context IDs(CID) in Context ID(CID) drop-down list > click on Next button
Internet Connection Wizard 3
Select 'IP' as the packet data protocol type(PDP Type) > Click on Next button
Internet Connection Wizard 4
In this window, select Dynamic IP address > click on Next button
Internet Connection Wizard 5
In this window, select Dynamic DNS addresses > click on Next button
Fall-back connection creation
In this window, select 'No' option > click on Next button
Internet Connection Wizard Finished
This is the last window of Internet Connection Wizard. Click 'Finish' to close the Wizard
Manage your connections
In the following window, 'qbMore' icon is created. Double click on this icon to start connect your PC to the internet.
Establishing the connection
This is the process of connecting to the internet.
Connection Successful
If connection is successful, The following window will be displayed. This window displays information such as Duration of connect, Send data(KB), Received(KB), Network(UMTS), and Operator(qb)
If you have any connection problems please check in Common Troubleshooting
Common Troubleshooting Please follow the instructions below, if you have any connection problems: USB connection: Make sure that you are using a compatible cable. Check that the cable is properly connected to the PC and to the phone. Alternatively, try to use another USB port on the PC. Turn the phone off and then back on. Your USB drivers may need to be reinstalled: just uninstall and install the PC Suite again.
Bluetooth connection: Make sure that Bluetooth is enabled on both your PC and on the phone. Try turning the phone off and then back on. Remove your phone in the Bluetooth configuration panel on the PC and run the Phone Connection wizard again.
